{"title":"Titman Edge Saw Blades","description":"\u003cp\u003eA range of Timan Edge saw blades for cordless saws to bench saws and rough cutting to panel finishing.\u003c\/p\u003e\n\u003cp\u003eGet the job done fast and efficiently with the correct blade for the job.\u003c\/p\u003e","products":[{"product_id":"titman-edge-tct-thin-kerf-circular-saw-blade-136mm-x-20mm-x-24-tooth-tb1362420t","title":"Titman Edge TCT Thin Kerf Circular Saw Blade 136mm x 20mm x 24 Tooth - TB1362420T","description":"Titman Edge TCT Thin Kerf Circular Saw Blade 136mm diameter, 20mm bore, 24 tooth, with a non-stick coating. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 20mm  Diameter: 136mm  Tooth Count: 24  Kerf: 1.5mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood Cutting Blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1362420T  Weight: 156g    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting  ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233847841003,"sku":"","price":24.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1362420Tcopy__33466.png?v=1640268220"},{"product_id":"titman-edge-tct-thin-kerf-circular-saw-blade-150mm-x-10mm-x-24-tooth-tb1502410t","title":"Titman Edge TCT Thin Kerf Circular Saw Blade 150mm x 10mm x 24 Tooth - TB1502410T","description":"Titman Edge TCT Thin Kerf Circular Saw Blade 150mm diameter, 10mm bore, 24 tooth with a non-stick coating. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades.  Specification:   Bore: 10mm  Diameter: 150mm  Tooth Count: 24  Max Speed: 7000 RPM   Kerf: 1.5mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood Cutting Blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1502410T Quick Ref Number: 2 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip. Ideal for cutting non-ferrous metals such as aluminium or plastics   ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut.    APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233848004843,"sku":"","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1502410T1-0181-1__30323.jpg?v=1640268228"},{"product_id":"titman-edge-tct-medium-finish-circular-saw-blade-160mm-x-20mm-x-24-tooth-tb1602420","title":"Titman Edge TCT Medium Finish Circular Saw Blade 160mm x 20mm x 24 Tooth - TB1602420","description":"Titman Edge TCT Medium Finish Circular Saw Blade 160mm diameter, 20mm bore, 24 tooth with a non-stick coating. For hand-held circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 20mm  Diameter: 160mm  Tooth Count: 24  Max Speed: 10,000 RPM  Kerf: 2.4mm  Rake\/Hook: 15º  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1602420 Quick Ref Number:  Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233848168683,"sku":"","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1602420copy__00006.png?v=1640268188"},{"product_id":"titman-edge-tct-fine-finish-circular-saw-blade-160mm-x-20mm-x-48-tooth-tb1604820","title":"Titman Edge TCT Fine Finish Circular Saw Blade 160mm x 20mm x 48 Tooth - TB1604820","description":"Titman Edge TCT Fine Finish Circular Saw Blade 160mm diameter, 20mm bore, 48 tooth with a non-stick coating. For hand-held circular saws.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. TB1604820 Saw Blade Specification:   Bore: 20mm  Diameter: 160mm  Tooth Count: 48  Max Speed: 10,000 RPM  Kerf: 2.2mm  Rake\/Hook: 4º  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1604820  Quick Ref Number: 5      COMPATIBLE WITH (MANUFACTURER AND MODEL)           FESTO (FESTOOL) TS55EQ   SCHEPPACH PL55           Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233848234219,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1604820__80433.png?v=1640268224"},{"product_id":"titman-edge-tct-fine-finish-plunge-saw-blade-160mm-x-20mm-x-48-tooth-tb1604820atb","title":"Titman Edge TCT Fine Finish Plunge Saw Blade 160mm x 20mm x 48 Tooth - TB1604820TATB","description":"Titman Edge TCT Fine Finish Circular Saw Blade 160mm diameter, 20mm bore, 48 tooth with non-stick coating. For plunge saws.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 20mm  Diameter: 160mm  Tooth Count: 48  Max Speed: 10,000 RPM  Kerf: 2.2mm  Rake\/Hook: 4º Hook  Tooth Form: TCP  Material Type: Wood cutting blade  Machine Type: Plunge Saw  Product Code: TB1604820TCP  Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233848332523,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1604820TCP__23794.png?v=1640268146"},{"product_id":"titman-edge-tct-medium-finish-circular-saw-blade-165mm-x-30mm-x-18-tooth-tb1651830","title":"Titman Edge TCT Medium Finish Circular Saw Blade 165mm x 30mm x 18 Tooth - TB1651830","description":"Titman Edge TCT Thin Kerf Circular Saw Blade 165mm diameter, 30mm bore, 18 tooth with a non-stick coating. For hand-held circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 165mm  Tooth Count: 18  Max Speed: 10,000 RPM  Kerf: 2.4mm  Rake\/Hook: 15º  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1651830 Weight:      Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233848398059,"sku":"","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1651830__40631.png?v=1640268229"},{"product_id":"titman-edge-tct-thin-kerf-circular-saw-blade-165mm-x-20mm-x-24-tooth-tb1652420t","title":"Titman Edge TCT Thin Kerf Circular Saw Blade 165mm x 20mm x 24 Tooth - TB1652420T","description":"Titman Edge TCT Thin Kerf Circular Saw Blade 165mm diameter, 20mm bore, 24 tooth.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 20mm  Diameter: 165mm  Tooth Count: 24  Max Speed: 7000 RPM  Kerf: 1.6mm  Rake: 15º  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1652420T  Quick Ref Number: 7 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849217259,"sku":"","price":22.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1652420Tcopy__76185.png?v=1640268233"},{"product_id":"titman-edge-tct-medium-finish-circular-saw-blade-165mm-x-30mm-x-24-tooth-tb1652430","title":"Titman Edge TCT Medium Finish Circular Saw Blade 165mm x 30mm x 24 Tooth - TB1652430","description":"Titman Edge TCT Medium Finish Circular Saw Blade 165mm diameter, 30mm bore, 24 tooth with a non-stick coating. For hand-held circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 165mm  Tooth Count: 24  Max Speed: 10,000 RPM  Kerf: 2.4mm  Rake: 15º  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless\/Portable Saw  Product Code: TB1652430  Quick Ref Number: 8 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849315563,"sku":"","price":25.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1652430copy__32335.png?v=1640268151"},{"product_id":"titman-edge-tct-thin-kerf-fine-finish-circular-saw-blade-165mm-x-20mm-x-40-tooth-tb1654020t","title":"Titman Edge TCT Thin Kerf Fine Finish Circular Saw Blade 165mm x 20mm x 40 Tooth - TB1654020T","description":"Titman Edge TCT Thin Kerf Fine Finish Circular Saw Blade 165mm diameter, 20mm bore, 40 tooth with a non-stick coating. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:  Bore: 20mm Diameter: 165mm Tooth Count: 40 Max Speed: 7000 RPM Kerf: 1.5mm Rake: 15º Tooth Form: ATB Material Type: Wood cutting blade Machine Type: Cordless\/Portable Saw Product Code: TB1654020T Quick Ref Number: 9 Weight: 0.222kg  Understanding Saw Blade Specification:  TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag, and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  APSC Coated Saw Blades - the Benefits  reduced friction between the blade and the material to being cut reduced heat build-up in the blade blade cuts quieter increased blade lifespan blade stays sharp for longer protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849381099,"sku":"","price":24.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1654020Tcopy__27779.png?v=1640268235"},{"product_id":"titman-edge-tct-fine-finish-circular-saw-blade-165mm-x-20mm-x-48-tooth-tb1654820","title":"Titman Edge TCT Fine Finish Circular Saw Blade 165mm x 20mm x 48 Tooth - TB1654820","description":"Titman Edge TCT Fine Finish Circular Saw Blade 165mm diameter, 20mm bore, 48 tooth with non-stick coating. For hand-held circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. TB1654820 Saw Blade Specification:   Bore: 20mm  Diameter: 165mm  Tooth Count: 48  Max Speed: 10,000 RPM  Kerf: 2.2mm  Rake: 15º  Tooth Form: TCP Material Type:  Machine Type: Cordless\/Portable Saw Product Code:   Quick Ref Number: 11  APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849839851,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1654820__77171.png?v=1640268240"},{"product_id":"titman-edge-tct-thin-kerf-fine-finish-circular-saw-blade-165mm-x-20mm-x-48-tooth-tb1654820atb","title":"Titman Edge TCT Thin Kerf Fine Finish Circular Saw Blade 165mm x 20mm x 48 Tooth - TB1654820ATB","description":"Titman Edge TCT Thin Kerf Fine Finish Circular Saw Blade 165mm diameter, 20mm bore, 48 tooth with a non-stick coating. For hand-held circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 20mm  Diameter: 165mm  Tooth Count: 48  Max Speed: 10,000 RPM  Kerf: 2.2mm  Rake: 15º  Tooth Form: TCP Material Type: Plastics and aluminium  Machine Type: Cordless\/Portable Saw  Product Code: TB1654820TCP  Quick Ref Number: 11    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849872619,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1654820TCP__52309.png?v=1640268157"},{"product_id":"productstitman-edge-tct-general-purpose-saw-blade-180mm-x-30mm-x-24-tooth-tb1802430","title":"Titman Edge TCT General Purpose Saw Blade 180mm x 30mm x 24 Tooth - TB1802430","description":"Titman Edge TCT General Purpose Saw Blade 180mm diameter, 30mm bore, 24 tooth with a non-stick coating. Tungsten carbide tipped teeth. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 180mm  Tooth Count: 24  Max Speed: 10,000 RPM  Kerf: 2.4mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Plunge Saw  Product Code: TB1802430  Quick Ref Number: 12 Weight:     Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233849905387,"sku":"","price":25.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1802430copy__52350.png?v=1640268242"},{"product_id":"titman-edge-tct-medium-finish-circular-saw-blade-184mm-x-16mm-x-24-tooth-tb1842416","title":"Titman Edge TCT Medium Finish Circular Saw Blade 184mm x 16mm x 24 Tooth - TB1842416","description":"Titman Edge TCT Medium Finish Circular Saw Blade 184mm diameter, 16mm bore, 24 tooth with a non-stick coating. For hand-held circular saws. Tungsten carbide tipped teeth. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades.   Specification:   Bore: 16mm  Diameter: 184mm  Tooth Count: 24  Max Speed: 9,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Cordless\/Portable Saw  Product Code: TB1842416 Quick Ref Number: 13 Weight:     Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233850167531,"sku":"","price":26.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1842416copy__92784.png?v=1640268248"},{"product_id":"titman-edge-tct-medium-finish-circular-saw-blade-184mm-x-30mm-x-24-tooth-tb1842430","title":"Titman Edge TCT Medium Finish Circular Saw Blade 184mm x 30mm x 24 Tooth - TB1842430","description":"Titman Edge TCT Medium Finish Circular Saw Blade 184mm diameter, 30mm bore, 24 tooth with a non-stick coating. For hand-held circular saws. Tungsten carbide tipped teeth. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 184mm  Tooth Count: 24  Max Speed: 9,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Cordless\/Portable Saw  Product Code: TB1842430  Quick Ref Number: 14 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233850495211,"sku":"","price":26.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1842430copy__08536.png?v=1640268162"},{"product_id":"titman-edge-tct-general-purpose-saw-blade-184mm-x-30mm-x-40-tooth-tb1844030","title":"Titman Edge TCT General Purpose Saw Blade 184mm x 30mm x 40 Tooth - TB1844030","description":"Titman Edge TCT General Purpose Saw Blade 184mm diameter, 30mm bore, 40 tooth with a non-stick coating. Gives a medium\/fine finish. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 184mm  Tooth Count: 40  Max Speed: 9,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Plunge Saw  Product Code: TB1844030 Quick Ref Number:  Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233850593515,"sku":"","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1844030__53732.png?v=1640268194"},{"product_id":"titman-edge-tct-general-purpose-saw-blade-190mm-x-30mm-x-24-tooth-tb1902430","title":"Titman Edge TCT General Purpose Saw Blade 190mm x 30mm x 24 Tooth - TB1902430","description":"Titman Edge TCT General Purpose Saw Blade 190mm diameter, 30mm bore, 24 tooth with a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 190mm  Tooth Count: 24  Max Speed: 9000 RPM  Kerf: 1.6mm  Rake: 25º Hook  Tooth Form: ATB \u0026amp; Raker Material Type:  Machine Type: Plunge Saw  Product Code: TB1902430   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233850659051,"sku":"","price":26.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1902430copy__56300.png?v=1640268254"},{"product_id":"titman-edge-tct-thin-kerf-saw-blade-190mm-x-30mm-x-24-tooth-tb1902430t","title":"Titman Edge TCT Thin Kerf Saw Blade 190mm x 30mm x 24 Tooth - TB1902430T","description":"Titman Edge TCT Thin Kerf Saw Blade 190mm diameter, 30mm bore, 24 tooth with a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 190mm  Tooth Count: 24  Kerf: 1.6mm  Rake: 25º Hook  Tooth Form: ATB \u0026amp; Raker  Max. Speed: 9000 RPM  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB1902430T Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233850855659,"sku":"","price":27.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1902430Tcopy__25205.png?v=1640268168"},{"product_id":"titman-edge-tct-saw-blade-190mm-x-30mm-x-40-tooth-tb1904030","title":"Titman Edge TCT Saw Blade 190mm x 30mm x 40 Tooth - TB1904030","description":"Titman Edge TCT Saw Blade 190mm diameter, 30mm bore, 40 tooth with a non-stick coating. Gives a medium\/fine finish. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 190mm  Tooth Count: 40  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Max. Speed: 9000 RPM  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB1904030   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851019499,"sku":"","price":28.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1904030__90227.png?v=1640268200"},{"product_id":"titman-edge-tct-fine-finish-saw-blade-190mm-x-30mm-x-60-tooth-tb1906030","title":"Titman Edge TCT Fine Finish Saw Blade 190mm x 30mm x 60 Tooth - TB1906030","description":"Titman Edge TCT Saw Blade 190mm diameter, 30mm bore, 60 tooth with non-stick coating. Gives a fine finish. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 190mm  Tooth Count: 60  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Max. Speed: 9000 RPM  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB1906030 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851085035,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB1906030__98165.png?v=1640268174"},{"product_id":"titman-edge-tct-general-purpose-saw-blade-210mm-x-30mm-x-24-tooth-tb2102430","title":"Titman Edge TCT General Purpose Saw Blade 210mm x 30mm x 24 Tooth - TB2102430","description":"Titman Edge TCT General Purpose Saw Blade 210mm diameter, 30mm bore, 24 tooth a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 210mm  Tooth Count: 24  Max Speed: 8,500 RPM  Kerf: 2.4mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB2102430 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851150571,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2102430copy__14624.png?v=1640268206"},{"product_id":"titman-edge-tct-saw-blade-210mm-x-30mm-x-48-tooth-tb2104830","title":"Titman Edge TCT Saw Blade 210mm x 30mm x 48 Tooth - TB2104830","description":"Titman Edge TCT Medium Finish Saw Blade 210mm diameter, 30mm bore, 48 tooth with a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.   And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 210mm  Tooth Count: 48  Max Speed: 8,500 RPM  Kerf: 2.4mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB2104830 Weight:      Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851216107,"sku":"","price":34.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2104830__71578.png?v=1640268246"},{"product_id":"titman-edge-tct-general-purpose-saw-blade-215mm-x-30mm-x-24-tooth-tb2152430","title":"Titman Edge TCT General Purpose Saw Blade 215mm x 30mm x 24 Tooth - TB2152430","description":"Titman Edge TCT General Purpose Saw Blade 215mm diameter, 30mm bore, 24 tooth a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 215mm  Tooth Count: 24  Max Speed: 10,000 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB2152430 Weight:      Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851281643,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2152430copy__63021.png?v=1640268179"},{"product_id":"titman-edge-tct-saw-blade-215mm-x-30mm-x-48-tooth-tb2154830","title":"Titman Edge TCT Saw Blade 215mm x 30mm x 48 Tooth - TB2154830","description":"Titman Edge TCT Medium Finish Saw Blade 215mm diameter, 30mm bore, 48 tooth with a non-stick coating.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 215mm  Tooth Count: 48  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB2154830 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851412715,"sku":"","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2154830__34789.png?v=1640268211"},{"product_id":"titman-edge-tct-fine-finish-saw-blade-215mm-x-30mm-x-60-tooth-tb2156030","title":"Titman Edge TCT Fine Finish Saw Blade 215mm x 30mm x 60 Tooth - TB2156030","description":"Titman Edge TCT Fine Finish Saw Blade 215mm diameter, 30mm bore, 60 tooth with a non-stick coating. For fine finish saw blade.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. below. Specification:   Bore: 30mm  Diameter: 215mm  Tooth Count: 60  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting blade  Machine Type: Cordless Saw  Product Code: TB2156030 Weight:      Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting   ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233851478251,"sku":"","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2156030__04003.png?v=1640268252"},{"product_id":"titman-edge-tct-saw-blade-215mm-x-30mm-x-64-tooth-tb2156430tcpn","title":"Titman Edge TCT Saw Blade 215mm x 30mm x 64 Tooth - TB2156430TCPN","description":"Titman Edge TCT Fine Finish Saw Blade 215mm diameter, 30mm bore, 64 tooth with a non-stick coating. For cutting non-ferrous metals like aluminium and plastics.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 215mm  Tooth Count: 64  Max Speed: 8,500 RPM  Kerf: 2.8mm  Rake: -6º Hook  Tooth Form: TCP  Material Type: Plastics and non-ferrous metals  Machine Type: Cordless Saw  Product Code: TB2156430TCPN Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  PTFE Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852002539,"sku":"","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2156430TCPN__63780.png?v=1640268258"},{"product_id":"titman-edge-tct-mitre-saw-blade-216mm-x-30mm-x-24-tooth-tb2162430n","title":"Titman Edge TCT Mitre Saw Blade 216mm x 30mm x 24 Tooth - TB2162430N","description":"Titman Edge TCT General Purpose Mitre Saw Blade 216mm diameter, 30mm bore, 24 tooth with a non-stick coating. For cross-cutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 216mm  Tooth Count: 24  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: -5º Hook  Tooth Form: ATB Negative  Material Type: Cross-cutting wood blade  Machine Type: Mitre Saw  Product Code: TB2162430N Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852068075,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2352430copy_c9ce0cd2-cee7-43e3-9dea-73e0ce6a93bb__93877.png?v=1640268217"},{"product_id":"titman-edge-tct-mitre-saw-blade-216mm-x-30mm-x-48-tooth-tb2164830n","title":"Titman Edge TCT Mitre Saw Blade 216mm x 30mm x 48 Tooth - TB2164830N","description":"Titman Edge TCT Medium Finish Mitre Saw Blade 216mm diameter, 30mm bore, 24 tooth with a non-stick coating. For cross-cutting.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:    Bore: 30mm  Diameter: 216mm  Tooth Count: 48  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: -5º Hook  Tooth Form: ATB Negative  Material Type: Cross-cutting wood blade  Machine Type: Mitre Saw Product Code:      TB2164830N     Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852100843,"sku":"","price":34.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2164830N__03072.png?v=1640268260"},{"product_id":"titman-edge-tct-mitre-saw-blade-216mm-x-30mm-x-60-tooth-tb2166030n","title":"Titman Edge TCT Mitre Saw Blade 216mm x 30mm x 60 Tooth - TB2166030N","description":"Titman Edge TCT Fine Finish Mitre Saw Blade 216mm diameter, 30mm bore, 24 tooth with a non-stick coating. For cross-cutting.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 216mm  Tooth Count: 60  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: -5º Hook  Tooth Form: ATB Negative  Material Type: Cross-cutting wood blade  Machine Type: Mitre Saw  Product Code: TB2166030N Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852166379,"sku":"","price":37.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2166030N__84995.png?v=1640268264"},{"product_id":"titman-edge-tct-general-purpose-saw-blade-230mm-x-30mm-x-24-tooth-tb2302430","title":"Titman Edge TCT General Purpose Saw Blade 230mm x 30mm x 24 Tooth - TB2302430","description":"Titman Edge TCT General Purpose Saw Blade 230mm diameter, 30mm bore, 24 tooth a non-stick coating. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 230mm  Tooth Count: 24  Max Speed: 8,500 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting saw blade  Machine Type: General Purpose  Product Code: TB2302430 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852231915,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2302430copy__50420.png?v=1640268185"},{"product_id":"titman-edge-tct-medium-finish-saw-blade-230mm-x-30mm-x-40-tooth-tb2304030","title":"Titman Edge TCT Medium Finish Saw Blade 230mm x 30mm x 40 Tooth - TB2304030","description":"Titman Edge TCT Saw Blade 230mm diameter, 30mm bore, 40 tooth with a non-stick coating. Gives a medium\/fine finish.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 230mm Tooth Count: 40  Max Speed: 7,600 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting saw blade  Machine Type: General Purpose  Product Code: TB2304030 Weight:    Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852297451,"sku":"","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2304030__49651.png?v=1640268266"},{"product_id":"titman-edge-tct-medium-finish-saw-blade-235mm-x-30mm-x-24-tooth-tb2352430","title":"Titman Edge TCT Medium Finish Saw Blade 235mm x 30mm x 24 Tooth - TB2352430","description":"Titman Edge TCT General Purpose Saw Blade 235mm diameter, 30mm bore, 24 tooth with a non-stick coating. Gives a medium\/fine finish. Tungsten carbide tipped teeth. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 235mm  Tooth Count: 24  Max Speed: 7,600 RPM  Kerf: 2.6mm  Rake: 15º Hook  Tooth Form: ATB  Material Type: Wood cutting saw blade  Machine Type: General Purpose  Product Code: TB2352430   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   ATB \u0026amp; Raker: found on blades with higher degrees of rake\/hook. For cutting melamine and plastic laminate without the use of a scoring blade   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852395755,"sku":"","price":34.45,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2352430copy__34763.png?v=1640268270"},{"product_id":"titman-edge-tools-tct-medium-finish-crosscutting-saw-blade-235mm-x-30mm-x-40-tooth-bore-tct-tb2354030","title":"Titman Edge Tools TCT Medium Finish Crosscutting Saw Blade  235mm x 30mm x 40 Tooth bore TCT - TB2354030","description":"Titman Edge Tools TCT Medium Finish Crosscutting Sawblade  235mm diameter, 30mm bore, 40 Tooth with a non-stick coating. Gives a medium finish, for handheld circular saws. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specifications:    Bore: 30mm  Diameter: 235mm  Tooth Count: 40  Max Speed: 7,600 RPM  Kerf: 2.4mm  Rake: 15º Hook  Tooth Form: ATB Material Type:   Machine Type: Crosscutting Sawblade  Product Code: TB2354030 Quick Ref Number:  Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting  ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852723435,"sku":"","price":35.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2354030__34276.png?v=1640268223"},{"product_id":"titman-edge-tools-tct-medium-finish-mitre-saw-crosscutting-saw-blade-250mm-x-30mm-x-42-tb2504230n","title":"Titman Edge Tools TCT Medium Finish Mitre Saw Crosscutting Saw Blade 250mm x 30mm x 42 - TB2504230N","description":"Titman Edge Tools TCT Medium Finish Mitre Saw Crosscutting Sawblade 250mm diameter, 30mm bore, 42 tooth with a non-stick coating. Gives a medium finish for crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 250mm  Tooth Count: 42  Max Speed: 9,500 RPM  Kerf: 3mm  Rake: Negative 5º Hook  Tooth Form: ATB Negative Material Type:  Machine Type: Crosscutting Sawblade  Product Code: TB2504230N  Quick Ref Number: 33 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233852788971,"sku":"","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2504230N__62244.png?v=1640268272"},{"product_id":"titman-edge-tct-fine-finish-crosscutting-saw-blade-250mm-x-30mm-x-48-tooth-tb2504830","title":"Titman Edge TCT Fine Finish Crosscutting Saw Blade 250mm x 30mm x 48 tooth - TB2504830","description":"Titman Edge TCT Tools Fine Finish Crosscutting Sawblade 250mm diameter, 30mm bore, 48 tooth with a non-stick coating. Gives a fine finish for crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 250mm  Tooth Count: 48  Max Speed: 7,600 RPM  Kerf: 3mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Fine Finish Crosscutting Saw  Product Code: TB2504830 Quick Ref Number:  Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853149419,"sku":"","price":39.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2504830__25479.png?v=1640268191"},{"product_id":"titman-edge-tools-fine-finish-crosscutting-saw-blade-tct-250mm-x-30mm-60-tooth-tb2506030","title":"Titman Edge Tools Fine Finish Crosscutting Saw Blade TCT 250mm x 30mm 60 Tooth - TB2506030","description":"Titman Edge Tools Fine Finish Crosscutting Sawblade TCT 250mm diameter, 30mm bore, 60 Tooth with a non-stick coating. For fine finish crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 250mm  Tooth Count: 60  Max Speed: 7,600 RPM  Kerf: 2.8mm  Rake: 15º Hook  Tooth Form: ATB Material Type:  Machine Type: Fine Finish Crosscutting  Product Code: TB2506030  Quick Ref Number: 35 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853313259,"sku":"","price":44.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2506030__12171.png?v=1640268229"},{"product_id":"titman-edge-tools-tct-extra-fine-finish-mitre-saw-crosscutting-saw-blade-250mm-x-30mm-x-48-tooth-tct-tb2507230n","title":"Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Saw Blade - 250mm x 30mm x 48 Tooth TCT - TB2507230N","description":"Titman Edge Tools TCT Extra Fine Finish Mitre Saw Crosscutting Sawblade 250mm diameter,  30mm bore, 48 Tooth TCT. For fine finish crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 250mm  Tooth Count: 48  Max Speed: 9,500 RPM  Kerf: 3mm  Rake: Negative 5º Hook  Tooth Form: Negative ATB Material Type:  Machine Type: Fine Finish Mitre Saw  Product Code: TB2507230N  Quick Ref Number: 36 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853378795,"sku":"","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2507230N__53794.jpg?v=1640268275"},{"product_id":"titman-edge-tools-tct-saw-blade-for-aluminium-plastic-250mm-x-30mm-x-88-tooth-tb2508430tcpn","title":"Titman Edge Tools TCT Saw Blade for Aluminium \u0026 Plastic 250mm x 30mm x 88 Tooth - TB2508430TCPN","description":"Titman Edge Tools TCT for Aluminium \u0026amp; Plastic 250mm diameter, 30mm bore, 88 Tooth with a non-stick coating. Used for cutting aluminium and plastics.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 250mm Tooth Count: 88  Max Speed: 7,600 RPM  Kerf: 3mm  Rake: Negative 6º Hook  Tooth Form: Negative ATB Material Type:  Machine Type: Aluminium \u0026amp; Plastic Cutting Blade  Product Code: TB2508430TCPN  Quick Ref Number: 37 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are beveled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853444331,"sku":"","price":59.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB2508430TCPN__47958.png?v=1640268196"},{"product_id":"titman-edge-tools-medium-finish-mitre-saw-crosscutting-saw-blade-305mm-30mm-48-tooth-tb3054830n","title":"Titman Edge Tools Medium Finish Mitre Saw Crosscutting Saw Blade 305mm, 30mm, 48 Tooth - TB3054830N","description":"Titman Edge Tools Medium Finish Mitre Saw Crosscutting Sawblade 305mm diameter, 30mm bore, 48 Tooth with a non-stick coating. For medium finish crosscutting. Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades. Specification:   Bore: 30mm  Diameter: 305mm  Tooth Count: 48  Max Speed: 6,000 RPM  Kerf: 3mm  Rake: Negative 5º Hook  Tooth Form: Negative ATB Material Type:  Machine Type: Medium Finish Mitre Saw Crosscutting  Product Code: TB3054830N  Quick Ref Number: 38 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut   APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853509867,"sku":"","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB3054830Ncopy__67189.png?v=1640268234"},{"product_id":"titman-edge-tct-fine-finish-mitre-saw-crosscutting-saw-blade-305mm-x-30mm-x-64-tooth-tb3056430n","title":"Titman Edge TCT Fine Finish Mitre Saw Crosscutting Saw Blade 305mm x 30mm x 64 Tooth - TB3056430N","description":"Titman Edge TCT Fine Finish Mitre Saw Crosscutting Sawblade 305mm diameter, 30mm bore, 64 Tooth with non-stick coating. For fine finish crosscutting.  Resin build up and rust on saw blades, over time, contribute to inaccurate, slow cuts. The Titman Edge saw blades benefit from an APSC non-stick coating which helps prevent a build-up of resin and protects against rusting. During manufacturing, an electrostatic generator ensures this acrylic and polymer coating is absorbed onto the surface of the blade. Coupled with the tungsten carbide tipped teeth, each blade will run sharp and true for longer. In simple terms, rather than cutting with a bare steel blade, which is susceptible to rusting and holding onto wood resin, the Titman Edge blade coating literally has a layer of protection against both.  And there's no need to use expensive PTFE sprays to protect your saw blades.  Specification:   Bore: 30mm  Diameter: 305mm  Tooth Count: 64  Max Speed: 6,000 RPM  Kerf: 3mm  Rake: Negative 5º Hook  Tooth Form: Negative ATB Material Type:  Machine Type: Fine Finishing Mitre Saw Crosscutting  Product Code: TB3056430N  Quick Ref Number: 39 Weight:   Understanding Saw Blade Specification:   TCP: Triple Chip teeth combine a balanced cutting force, low tooth drag and free chip flow. This helps to eliminate chipping in brittle material such as chipboard, and laminates. This tooth design is also used on blades for cutting non-ferrous material, like aluminium or plastics  ATB: Alternative Top Bevel. The teeth have cutting edges on each alternative tooth. The teeth are bevelled at oppositive angles. Choose ATB blades for clean cuts with reduced break-outs and\/or chipping at the edges   Kerf: The term \"kerf\" is used to describe the thickness of the cut the saw blade makes. It is literally the amount of material expended when making the cut   Rake\/Hook: the angle of the tip of the saw blade's teeth. Higher positive angles feed the blade faster into the material and are ideal for quick rip cuts in softer wood. Lower positive angles feed the blade more slowly and are better for fine cuts or cutting harder wood. Negative hook angles, usually -5º, are used to prevent self-feeding of materials and give the operator maximum control over the feed of cut  APSC Coated Saw Blades - the Benefits   reduced friction between the blade and the material to being cut  reduced heat build-up in the blade  blade cuts quieter  increased blade lifespan  blade stays sharp for longer  protection against the blade rusting ","brand":"Titman Edge","offers":[{"title":"Default Title","offer_id":42233853640939,"sku":"","price":54.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/products\/TB3056430Ncopy__81509.png?v=1640268278"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0616\/3700\/1451\/collections\/Blade_in_Saw.png?v=1779026611","url":"https:\/\/jamesbarrysharpening.com\/collections\/titman-edge-saw-blades.oembed","provider":"James Barry Sharpening Solutions","version":"1.0","type":"link"}